Practical articles on roadwork, stormwater drainage, concrete, underground utilities and bridge work, written for owners, general contractors and developers planning projects in Southwest Florida.
Silt fence installation only works when the fabric is trenched in, staked and placed along the contour. See the common failures and what inspectors look for.
Slip lining pipe means sliding a new, smaller pipe inside an old one and grouting the gap. See when it works for storm lines and the capacity trade-offs.
The asphalt paving process runs from base prep and tack coat to laydown and rolling. See what each step does on roads and commercial sites, and what to check.
Mechanical dredging lifts sediment with a bucket or excavator from a barge. Learn how it compares with hydraulic dredging and what permits and plans cover.
How does directional boring work? We walk through the pilot bore, reaming and pullback, and when a bore beats an open cut under roads, canals and driveways.
Types of storm drain inlets include curb, grate, combination and ditch bottom inlets. See where each one works and what to check on the drainage plans.
A bridge deck overlay adds a new riding surface and protects the concrete below. Learn when owners choose one, common overlay types and how work gets staged.
A maintenance of traffic plan keeps drivers, pedestrians and crews safe during roadwork. See what it covers in Florida and how it shapes bids and schedules.
Cured in place pipe lining rebuilds a failing storm pipe from inside, without digging up the road. Learn when it fits, its limits and what owners should plan.
ADA sidewalk requirements cover width, slope, cross slope, surface and curb ramps. Here’s what public owners and contractors should check in the plans.
What is a force main? It’s a pressurized sewer line fed by a lift station. Learn how it works, how it differs from gravity sewer and what plans should show.
